Installation

BRAKE CONTROL: FRONT SPEED SENSOR (for 4WD): INSTALLATION

INSTALLATION

1. INSTALL FRONT SPEED SENSOR





(a) Install the front speed sensor with the bolt.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)
NOTE:
Prevent foreign matter from attaching to the sensor tip.

(b) Connect the front speed sensor connector.
2. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft-lbf)
3. INSPECT SPEED SENSOR SIGNAL
Test Mode Procedure