Removal

A760H AUTOMATIC TRANSMISSION: FLOOR SHIFT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END LH Removal
6. REMOVE CONSOLE BOX PLATE Removal
7. REMOVE CONSOLE BOX REGISTER ASSEMBLY Removal
8. REMOVE CONSOLE BOX Removal
9. REMOVE NO.2 CONSOLE BOX DUCT Removal
10. REMOVE FRONT EXHAUST PIPE ASSEMBLY
Removal
11. REMOVE FRONT FLOOR HEAT INSULATOR NO.1 Removal
12. SEPARATE FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY





(a) Remove the nut and separate the floor shift gear shifting rod sub-assembly.
13. REMOVE FLOOR SHIFT ASSEMBLY
(a) Disconnect the connectors.





(b) Remove the 4 bolts.
(c) Remove the floor shift assembly.