Installation

SUSPENSION CONTROL: REAR ACTIVE STABILIZER CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL REAR ACTIVE STABILIZER CONTROL ECU





(a) Using the procedures below, connect the 2 ECU connectors.
(1) Connect the ECU connector. (*1)
(2) Rotate the lever in the direction of the arrow until a "click" sound is heard. (*2)
(3) Lock the lever's lock. (*3)
(b) Install the ECU with the 3 nuts.
Torque: 8.5 Nm (87 kgf-cm, 75 in-lbf)





(c) Connect the harness clamp to the rear active stabilizer control ECU.
2. INSTALL ACTIVE STABILIZER CONVERTER COVER
3. INSTALL TOOL BOX Installation
4. INSTALL TOOL BOX BOARD
5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT Installation
6. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE LH
7. INSTALL LUGGAGE COMPARTMENT TRIM COVER SIDE RH
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.