Rear Acceleration Sensor

SUSPENSION CONTROL: REAR ACCELERATION SENSOR: INSPECTION

INSPECTION
NOTICE:
- Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

1. INSPECT REAR ACCELERATION SENSOR
(a) Connect 3 1.5 V dry batteries in series.





(b) Connect terminal 3 (SGV) to the battery's positive (+) terminal, and terminal 2 (SGND) to the battery's negative (-) terminal.
(c) Measure the voltage of the sensor.
Standard voltage:





NOTICE:
- Do not apply a voltage of more than 6 V.
HINT: When the acceleration sensor is tilted, it may output a different value.