Installation

STEERING COLUMN: STEERING CONTROL ECU: INSTALLATION

INSTALLATION

1. INSTALL STEERING CONTROL ECU





(a) Install the steering control ECU with the 3 screws.
- Align positioning boss (A) of the blower assembly with the hole of the steering control ECU.
- Securely engage the hook (B) of the steering control ECU with the blower assembly.





(b) Connect the 3 connectors to the steering control ECU.
2. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2 Installation
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

4. PERFORM VARIABLE GEAR RATIO STEERING SYSTEM CALIBRATION
HINT:
Variable Gear Ratio Steering System.