Installation

2GR-FSE STARTING: ENGINE SWITCH: INSTALLATION

INSTALLATION





1. INSTALL ENGINE SWITCH
(a) Attach the 2 claws to install the switch.
(b) Connect the switch connector.
2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation
3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
4. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
5. INSTALL INSTRUMENT SIDE PANEL LH Installation
6. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
7. INSTALL FRONT DOOR SCUFF PLATE LH Installation
8. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
9. INSTALL FRONT CONSOLE UPPER PANEL ASSEMBLY Installation
10. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation
11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

13. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.