Installation

MIRROR: OUTER MIRROR SWITCH: INSTALLATION

INSTALLATION





1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY
(a) Connect each connector.
(b) Attach the 2 claws to install the control panel.
(c) Install the 2 screws.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
3. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
4. INSTALL INSTRUMENT SIDE PANEL LH Installation
5. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
6. INSTALL FRONT DOOR SCUFF PLATE LH Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
8. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation
9. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation
10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

12. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.