Removal

2GR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal
3. REMOVE ENGINE ROOM SIDE COVER RH Removal





4. REMOVE MASS AIR FLOW METER
(a) Disconnect the MAF meter connector.
(b) Remove the 2 screws and MAF meter.
(c) Remove the O-ring from the MAF meter.