Removal

OTHER SYSTEM: CIGARETTE LIGHTER ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to pre-vent airbag and seat belt pretensioner activation.

2. REMOVE FRONT CONSOLE UPPER PANEL GARNISH Removal
3. REMOVE CONSOLE UPPER PANEL ASSEMBLY Removal
4. REMOVE CIGARETTE LIGHTER ASSEMBLY





(a) Rotate the socket body in the direction indicated by the arrow mark, and remove the socket body from the cigarette lighter.





(b) Rotate the ring nut in the direction indicated by the arrow mark, and remove the cigarette lighter from the console panel.