How to Proceed with Troubleshooting

CRUISE CONTROL: CRUISE CONTROL SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HOW TO PROCEED WITH TROUBLESHOOTING
HINT:
- Use these procedures to troubleshoot the cruise control system.
- *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.

2. PROBLEM SYMPTOM CONFIRMATION
NEXT -- Continue to next step.

3. CHECK MULTIPLEX COMMUNICATION SYSTEM*
Refer to how to proceed with troubleshooting How to Proceed With Troubleshooting.
(a) Check for output DTCs.
Result:





HINT: The ECM of this system is connected to the multiplex communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the multiplex communication system.

B -- PROCEED TO "MULTIPLEX COMMUNICATION SYSTEM"
A -- Continue to next step.

4. CHECK CAN COMMUNICATION SYSTEM*
Refer to the precaution CAN Communication System.
(a) Check for output DTCs.
Result:





HINT: The ECM of this system is connected to the CAN communication system. Therefore, before starting troubleshooting, make sure to check that there is no trouble in the CAN communication system.

B -- PROCEED TO "CAN COMMUNICATION SYSTEM"
A -- Continue to next step.

5. DTC CHECK AND CLEAR*
Refer to the DTC CHECK / CLEAR Cruise Control System.
NEXT -- Continue to next step.

6. DTC CHECK (OTHER THAN MPX AND CAN SYSTEM DTC)*
Refer to the DTC CHECK / CLEAR Cruise Control System.
Result:






A -- GO TO STEP 8
B -- Continue to next step.

7. DTC CHART
Refer to the diagnostic trouble code chart Cruise Control System.
NEXT -- GO TO STEP 11
8. PROBLEM SYMPTOM SIMULATION
Result:






B -- GO TO STEP 10
A -- Continue to next step.

9. SYMPTOM SIMULATION
Refer to the electronic circuit inspection procedure Electronic Circuit Inspection Procedure.
NEXT -- Continue to next step.

10. PROBLEM SYMPTOMS TABLE
Refer to the problem symptoms table Cruise Control System.
NEXT -- Continue to next step.

11. CIRCUIT INSPECTION
Refer to the P0500 P0500.
Refer to the TC and CG terminal circuit TC and CG Terminal Circuit.
NEXT -- Continue to next step.

12. TERMINALS OF ECU
Refer to the terminals of ECU Cruise Control System.
NEXT -- Continue to next step.

13. IDENTIFICATION OF PROBLEM
NEXT -- Continue to next step.

14. REPAIR OR REPLACE
NEXT -- Continue to next step.

15. CONFIRMATION TEST
NEXT -- END