Collision Avoidance Warning Indicator: Testing and Inspection

PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION

1. INSPECT NO. 1 CLEARANCE WARNING BUZZER
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Turn the clearance sonar main switch ON.
(e) Enter the following menus: Body Electrical / INTUITIVE P/A / Active Test.
(f) Check the operation by referring to the table below.

INTUITIVE P/A:





OK:
No. 1 clearance warning buzzer sounds.