Audio and Visual System

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 5C-40: Camera Picture Error

DTC 5C-40 - Camera Picture Error

DESCRIPTION





WIRING DIAGRAM





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK WIRE HARNESS (MULTI-DISPLAY - TELEVISION CAMERA)




(a) Disconnect the K47 display connector.
(b) Disconnect the Y8 camera connector.
(c) Measure the resistance of the wire harness side connectors.
Standard resistance:






NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.

2. CHECK MULTI-DISPLAY (CA+ VOLTAGE)




(a) Measure the voltage of the display.
Standard voltage:






NG -- REPLACE MULTI-DISPLAY
OK -- REPLACE TELEVISION CAMERA ASSEMBLY