Installation

AA80E AUTOMATIC TRANSMISSION: SPEED SENSOR: INSTALLATION

INSTALLATION

1. INSTALL SPEED SENSOR SP2





(a) Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the sensor connector.
2. INSTALL SPEED SENSOR NC3





(a) Install the speed sensor to the transmission case with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
(b) Connect the sensor connector.
3. INSTALL SPEED SENSOR NT





(a) Coat a new O-ring with ATF and install it to the speed sensor.
(b) Using a T30 ''TORX'' wrench, install the speed sensor with the bolt.
Torque: 6.8 Nm (69 kgf-cm, 60 in-lbf)
(c) Connect the sensor connector.
4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY Installation
5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY Installation
6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY Installation
7. ADD AUTOMATIC TRANSMISSION FLUID
(a) Add automatic transmission fluid AA80E Automatic Transmission.