Crankshaft, Engine

Crankshaft thrust clearance
Standard 0.04 to 0.24 (0.0016 to 0.0094 in.)
Maximum 0.30 mm (0.0118 in.)

Crankshaft circle runout
Maximum 0.06 mm (0.0024 in.)

Main journal diameter 60.988 to 61.000 mm (2.4011 to 2.4016 in.)

Main journal taper and out-of -round
Maximum 0.02 mm (0.0008 in.)

Crank pin diameter 52.992 to 53.000 mm (2.0863 to 2.0866 in.)

Crank pin taper and out-of-round
Maximum 0.02 mm (0.0008 in.)