Installation

NAVIGATION: NAVIGATION ANTENNA: INSTALLATION

INSTALLATION





1. INSTALL NAVIGATION ANTENNA
(a) Install the navigation antenna with the 3 screws and attach the 4 clips.
2. INSTALL NO. 1 HEATER TO REGISTER DUCT Reassembly
3. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT Reassembly
4. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY Installation
6. INSTALL FRONT PILLAR GARNISH LH Installation
7. INSTALL FRONT PILLAR GARNISH RH Installation
8. INSTALL GLOVE COMPARTMENT DOOR SUB-ASSEMBLY Installation
9. INSTALL FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY Installation
10. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
11. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY Installation
12. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY Installation
13. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY Installation
14. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Installation
15. INSTALL INSTRUMENT SIDE PANEL LH Installation
16. INSTALL INSTRUMENT SIDE PANEL RH Installation
17. INSTALL COMBINATION METER ASSEMBLY Installation
18. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Installation
19. INSTALL CONSOLE BOX Installation
20. INSTALL CONSOLE BOX REGISTER ASSEMBLY Installation
21. INSTALL CONSOLE BOX PLATE Installation
22. INSTALL INSTRUMENT PANEL FINISH PANEL END LH Installation
23. INSTALL INSTRUMENT PANEL FINISH PANEL END RH Installation
24. INSTALL CONSOLE UPPER PANEL ASSEMBLY Installation
25. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Installation
26. INSTALL HEADLIGHT DIMMER SWITCH ASSEMBLY Installation
27. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY Installation
28. INSTALL SPIRAL CABLE WITH STEERING SENSOR Installation
29. INSTALL STEERING COLUMN COVER Installation
30. INSTALL STEERING WHEEL ASSEMBLY Installation
31. INSTALL STEERING PAD Installation
32. INSTALL NO. 2 STEERING WHEEL COVER LOWER
33. INSTALL NO. 3 STEERING WHEEL COVER LOWER
34. INSTALL FRONT DOOR OPENING TRIM COVER LH Installation
35. INSTALL FRONT DOOR OPENING TRIM COVER RH Installation
36. INSTALL FRONT DOOR SCUFF PLATE LH Installation
37. INSTALL FRONT DOOR SCUFF PLATE RH Installation
38. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
39. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

40. CHECK SRS WARNING LIGHT
(a) Check SRS warning light Service Precautions.