Removal

U660E AUTOMATIC TRANSAXLE: DIFFERENTIAL OIL SEAL:

REMOVAL

1. DRAIN AUTOMATIC TRANSAXLE FLUID Removal
2. REMOVE FRONT WHEELS
3. REMOVE FRONT AXLE HUB NUT LH Removal
4. REMOVE FRONT AXLE HUB NUT RH
HINT: Use the same procedure described for the LH side.

5. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH Removal
6. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedure described for the LH side.

7. SEPARATE FRONT SPEED SENSOR LH Removal
8. SEPARATE FRONT SPEED SENSOR RH
HINT: Use the same procedure described for the LH side.

9. SEPARATE TIE ROD ASSEMBLY LH Removal
10. SEPARATE TIE ROD ASSEMBLY RH
HINT: Use the same procedure described for the LH side.

11. SEPARATE FRONT SUSPENSION LOWER NO. 1 ARM LH Removal
12. SEPARATE FRONT SUSPENSION LOWER NO. 1 ARM RH
13. SEPARATE FRONT AXLE ASSEMBLY LH Removal
14. SEPARATE FRONT AXLE ASSEMBLY RH
HINT: Use the same procedure described for the LH side.

15. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH Removal
16. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH Removal
17. SECURE FRONT AXLE HUB SUB-ASSEMBLY Removal
18. REMOVE TRANSAXLE CASE OIL SEAL





(a) Using SST, remove the oil seal from the transaxle case.
SST: 09308-00010
19. REMOVE FRONT TRANSAXLE CASE OIL SEAL





(a) Using SST, remove the oil seal from the transaxle housing.
SST: 09308-00010