Axle Nut

FRONT AXLE HUB NUT LH
Using a 36 mm socket wrench, install a new axle hub lock nut.
Torque: 199 Nm (2,030 kgf-cm, 147 ft-lbf)

REAR AXLE SHAFT NUT LH
Torque: 289 Nm (2,947 kgf-cm, 213 ft-lbf)
Install the lock cap and a new cotter pin.

NOTE: If the holes for the cotter pin are not aligned, tighten the nut an additional 60°.