Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY:

INSTALLATION
CAUTION: Be sure to read the precautionary notices concerning the SRS airbag system before servicing it Service Precautions.

1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Install the front passenger airbag with the 2 screws.
(b) Install the strap to the bracket.
(c) Install the 2 bolts.
2. REMOVE INSTRUMENT PANEL REINFORCEMENT Reassembly

3. REMOVE NO. 2 HEATER TO REGISTER DUCT Reassembly

4. REMOVE NO. 3 HEATER TO REGISTER DUCT Reassembly

5. REMOVE NO. 1 HEATER TO REGISTER DUCT Reassembly

6. REMOVE FRONT DEFROSTER NOZZLE Reassembly

7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT Reassembly

8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT Reassembly

9. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH Reassembly

10. REMOVE NO. 1 INSTRUMENT PANEL PIN Reassembly

11. REMOVE INSTRUMENT PANEL FINISH PLATE
12. REMOVE STEERING COLUMN ASSEMBLY Installation

13. REMOVE NO. 4 HEATER TO REGISTER DUCT Reassembly

14. REMOVE AUTOMATIC LIGHT CONTROL SENSOR Reassembly

15. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY
(a) Install the instrument panel safety pad Installation.
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
17. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

18. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.