Camshaft Bearing: Specifications

CAMSHAFT BEARING CAP (FOR BANK 1)





Uniformly tighten the 22 bearing cap bolts in several passes in the sequence shown in the illustration.
Front bearing cap (w/o seal washer):
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
Others:
Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)


CAMSHAFT BEARING CAP (FOR BANK 2)





Uniformly tighten the 22 bearing cap bolts in several passes in the sequence shown in the illustration.
Front bearing cap (w/o seal washer):
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
Others:
Torque: 16 Nm (163 kgf-cm, 12 ft-lbf)