Installation

SEAT BELT: SHOULDER BELT ANCHORAGE SWITCH: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.





1. INSTALL HEIGHT ADJUSTABLE ANCHOR SWITCH
(a) Attach the 2 claws to install the switch.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY Installation

3. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY Installation

4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.