Installation

SEAT: REAR SEATBACK HEATER (for Power Seat): INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL REAR SEATBACK COVER SUB-ASSEMBLY RH Reassembly

2. INSTALL SEATBACK COVER WITH PAD RH Reassembly

3. INSTALL REAR NO. 1 SEAT COVER BEZEL Reassembly

4. INSTALL REAR NO. 1 SEAT HEADREST ADJUSTER SUB-ASSEMBLY RH Reassembly

5. INSTALL SEAT CLIMATE CONTROL ECU RH Reassembly

6. INSTALL POSITION CONTROL ECU RH Reassembly

7. INSTALL REAR SEAT HEADREST SUPPORT RH Reassembly

8. INSTALL REAR SEAT HEADREST ASSEMBLY RH Reassembly

9. INSTALL REAR SEAT SHOULDER BELT GUIDE RH Reassembly

10. INSTALL REAR SEATBACK COVER SUB-ASSEMBLY LH Reassembly

11. INSTALL SEATBACK COVER WITH PAD LH Reassembly

12. INSTALL REAR NO. 2 SEAT COVER BEZEL Reassembly

13. INSTALL REAR SEAT NO. 1 HEADREST ADJUSTER SUB-ASSEMBLY LH Reassembly

14. INSTALL SEAT CLIMATE CONTROL ECU LH Reassembly

15. INSTALL POSITION CONTROL ECU LH Reassembly

16. INSTALL REAR SEAT HEADREST SUPPORT LH Reassembly

17. INSTALL REAR SEAT HEADREST ASSEMBLY LH Reassembly

18. INSTALL REAR SEAT SHOULDER BELT GUIDE LH Reassembly

19. INSTALL REAR SEATBACK ASSEMBLY RH Installation

20. INSTALL REAR SEATBACK ASSEMBLY LH Installation

21. INSTALL REAR SEAT CUSHION ASSEMBLY RH Installation

22. INSTALL REAR SEAT CUSHION ASSEMBLY LH Installation

23. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
24. INSTALL COWL TOP VENTILATOR LOUVER Installation

25. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.

26. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light Diagnosis System.