Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Rear): INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL REAR DOOR OUTSIDE HANDLE ASSEMBLY LH Installation

2. INSTALL REAR DOOR OUTSIDE HANDLE COVER LH Installation

3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY LH Installation

4. INSTALL REAR DOOR QUARTER WINDOW GLASS LH Installation

5. INSTALL REAR DOOR GLASS RUN LH Installation

6. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY LH Installation

7. INSTALL RR DOOR DIVISION BAR BRACKET LWR LH Installation

8. INSTALL REAR DOOR SERVICE HOLE COVER LH Installation

9. INSTALL REAR INNER DOOR GLASS WEATHERSTRIP LH Installation

10. INSTALL SIDE TRIM BOARD COVER REAR LH (w/ Rear Door Sunshade) Installation

11. INSTALL NO. 1 AUTO CURTAIN RAIL BRACKET LH (w/ Rear Door Sunshade) Installation

12. INSTALL REAR LH CURTAIN SUB-ASSEMBLY (w/ Rear Door Sunshade) Installation

13. INSTALL REAR DOOR NO. 2 FRAME GARNISH LH Installation

14. INSTALL REAR DOOR FRAME GARNISH LH Installation

15. INSTALL REAR DOOR TRIM COVER LH Installation

16. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH Installation

17. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY REAR Installation

18. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH Installation

19. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
20. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

21. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.