Installation

DOOR LOCK: ENTRY LOCK AND UNLOCK SWITCH (for Front): INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. INSTALL FRONT OUTSIDE DOOR HANDLE ASSEMBLY LH Installation

2. INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH Installation

3. INSTALL FRONT DOOR GLASS SUB-ASSEMBLY LH Installation

4. INSTALL FRONT INNER DOOR GLASS WEATHERSTRIP LH Installation

5. INSTALL FRONT DOOR SERVICE HOLE COVER LH Installation

6. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH Installation

7. INSTALL MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY Installation

8. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Installation

9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
10. INSTALL COWL TOP VENTILATOR LOUVER RH Installation

11. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.