Pre-Collision System (w/ Driver Monitor Camera)

PRE-COLLISION: PRE-COLLISION SYSTEM (w/ Driver Monitor Camera): DTC CHECK / CLEAR

DTC CHECK / CLEAR

1. CHECK DTC
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Enter the following menus: Body / Pre-Collision 1 / Trouble Code.
(e) Check for DTCs.
(f) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
(g) Check for DTC.
HINT: As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.

2. CLEAR DTC
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG).
(d) Enter the following menus: Body / Pre-Collision 1 / Trouble Code.
(e) Select "Clear", and clear the data.
(f) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Code.
(g) Select "Clear", and clear the data.
HINT: As the driving support ECU and seat belt control ECU output DTCs for the pre-collision system, be sure to check the DTCs in Pre-Collision 1 and Pre-Collision 2.