Neutral Safety Switch: Adjustments

A960E AUTOMATIC TRANSMISSION: PARK / NEUTRAL POSITION SWITCH: ADJUSTMENT

ADJUSTMENT

1. ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Loosen the bolt of the park/neutral position switch and move the shift lever to the N position.






(b) Align the groove and the neutral alignment mark line.
(c) Hold the switch in position and tighten the bolt.
Torque: 13 Nm (130 kgf-cm, 9 ft-lbf)
(d) After adjustment, perform the inspection On-Vehicle Inspection.