Installation

METER: STEERING PAD SWITCH:

INSTALLATION

1. INSTALL STEERING PAD SWITCH ASSEMBLY






(a) Engage the 4 pins.
(b) Install the steering pad switch assembly with the 2 screws.






(c) Connect the 2 connectors and engage the clamp.
2. INSTALL STEERING PAD Installation

3. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation

4. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INSPECT STEERING PAD Installation

7. INSPECT SRS WARNING LIGHT Diagnosis System
8. PERFORM INITIALIZATION
NOTE: Some systems need initialization after reconnecting the cable to the negative battery terminal Repair Instruction - Initialization.