Installation

TIRE AND WHEEL: TIRE PRESSURE WARNING ANTENNA:

INSTALLATION

1. INSTALL TIRE PRESSURE ANTENNA FRONT RH






(a) Install the front right tire pressure monitor antenna assembly with the nut.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
(b) Connect the connector.
2. INSTALL FRONT FENDER LINER RH
3. INSTALL FRONT TIRE (RH)
Torque: 103 Nm (1,050 kgf-cm, 911 in-lbf)
4. INSTALL TIRE PRESSURE ANTENNA REAR LH






(a) Install the rear left tire pressure monitor antenna assembly with the 2 nuts.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)






(b) Connect the connector.
5. INSTALL REAR FENDER LINER LH
6. INSTALL REAR TIRE (LH)
Torque: 103 Nm (1,050 kgf-cm, 911 in-lbf)
7. INSTALL REAR SEATBACK ASSEMBLY
8. INSTALL REAR SEAT CUSHION ASSEMBLY
9. REGISTRATION OF TRANSMITTER ID Registration

10. INSPECT TIRE PRESSURE WARNING SYSTEM Test Mode Procedure