Removal

4GR-FSE ENGINE CONTROL SYSTEM: ECM:

REMOVAL

1. REMOVE COOL AIR INTAKE DUCT SEAL Removal

2. REMOVE ENGINE ROOM SIDE COVER LH Removal

3. REMOVE ECM COVER






(a) Remove the 3 bolts and ECM cover.
- Remove all water on and around the ECM cover.
- Perform the inspection indoors to avoid rain.
- Be sure to prevent water intrusion to the ECM (connectors and screw parts).

4. REMOVE ECM
(a) Disconnect the ECM connectors.





(1) Using a screwdriver, disconnect the connector holder.
(2) Disconnect the 6 ECM connectors.






(b) Remove the 2 nuts and ECM.