Installation

BRAKE CONTROL: STEERING ANGLE SENSOR:

INSTALLATION

1. INSTALL STEERING ANGLE SENSOR






(a) Align the locating pins, engage the 6 claws and install the steering angle sensor to the spiral cable sub-assembly.
2. INSTALL SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR Installation

3. INSTALL STEERING COLUMN COVER Installation

4. INSTALL STEERING WHEEL ASSEMBLY Installation

5. INSTALL STEERING PAD Installation

6. INSTALL NO. 3 LOWER STEERING WHEEL COVER Installation

7. INSTALL NO. 2 LOWER STEERING WHEEL COVER Installation

8. INSPECT STEERING WHEEL CENTER POINT
(a) Inspect the steering wheel center point.
9. CONNECT BATTERY NEGATIVE TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected. Repair Instruction - Initialization

10. INSPECT STEERING PAD Installation

11. INSPECT SRS WARNING LIGHT Diagnosis System