Crankshaft, Engine
CRANKSHAFTMaximum circle runout: 0.06 mm (0.0024 in.)
Standard journal diameter: 60.988 to 61.000 mm (2.4011 to 2.4016 in.)
Maximum taper and out-of-round: 0.02 mm (0.0008 in.)
Crankshaft pin diameter: 47.992 to 48.000 mm (1.8894 to 1.8898 in.)
CRANKSHAFT THRUST CLEARANCE
Standard thrust clearance: 0.020 to 0.220 mm (0.0008 to 0.0087 in.)
Maximum thrust clearance: 0.30 mm (0.0118 in.)
CRANKSHAFT OIL CLEARANCE
Standard oil clearance: 0.026 to 0.047 mm (0.0010 to 0.0019 in.)
Maximum oil clearance: 0.050 mm (0.0020 in.)
Crankshaft main journal diameter:
Standard upper bearing center wall thickness (No. 1 and No. 4 journal):
Standard lower bearing center wall thickness (No. 1 and No. 4 journal):
Standard upper bearing center wall thickness (No. 2 and No. 3 journal):
Standard lower bearing center wall thickness (No. 2 and No. 3 journal):
