Removal

1UR-FSE ENGINE CONTROL SYSTEM: KNOCK SENSOR: REMOVAL

1. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold Removal

2. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY Removal

3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY Removal

4. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY LH Removal

5. REMOVE NO. 4 FUEL PIPE SUB-ASSEMBLY Removal

6. REMOVE SEPARATOR CASE






(a) Disconnect the fuel pressure sensor connector.






(b) Remove the 4 bolts and case separator.
7. REMOVE KNOCK SENSOR






(a) Disconnect the 4 knock sensor connectors.
(b) Remove the 4 bolts and 4 knock sensors.