Removal

1UR-FSE ENGINE CONTROL SYSTEM: ACCELERATOR PEDAL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization.

2. REMOVE ACCELERATOR PEDAL






(a) Disconnect the accelerator pedal sensor connector.
(b) Remove the 2 nuts and accelerator pedal.
NOTICE:
- Avoid physical shocks to the accelerator pedal.
- Do not disassemble the accelerator pedal assembly.