Removal

1UR-FSE ENGINE CONTROL SYSTEM: CAMSHAFT TIMING CONTROL MOTOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Repair Instruction - Initialization

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE ENGINE ROOM SIDE COVER LH Removal

4. REMOVE ENGINE ROOM SIDE COVER RH Removal

5. REMOVE V-BANK COVER SUB-ASSEMBLY Removal

6. REMOVE NO. 1 AIR CLEANER INLET Removal

7. REMOVE AIR CLEANER CAP SUB-ASSEMBLY Removal

8. REMOVE AIR CLEANER CASE SUB-ASSEMBLY Removal

9. REMOVE CAMSHAFT TIMING CONTROL MOTOR RH






(a) Disconnect the 2 camshaft timing control motor connectors and 2 clamps.






(b) Remove the bolt and engine wire bracket.






(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.
10. REMOVE CAMSHAFT TIMING CONTROL MOTOR LH






(a) Disconnect the 2 camshaft timing control motor connectors and 2 engine wire clamps.






(b) Remove the bolt and engine wire bracket.






(c) Remove the 3 bolts and camshaft timing control motor.
(d) Remove the O-ring from the timing chain cover.