Installation

2GR-FSE COOLING: COOLING FAN ECU: INSTALLATION

1. INSTALL COOLING FAN ECU
(a) Install the ECU to the fan shroud with the 2 screws.
Torque: 2.5 Nm (25 kgf-cm, 22 in-lbf)
(b) Connect the 3 connectors to the ECU.
2. INSTALL NO. 1 AIR CLEANER INLET Installation

3. INSTALL COOL AIR INTAKE DUCT SEAL Installation

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.