Installation

AUDIO / VISUAL: STEREO COMPONENT AMPLIFIER: INSTALLATION

HINT:
A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.





1. INSTALL NO. 2 AMPLIFIER BRACKET
(a) Install the bracket's aligning protrusions labeled A to the amplifier.
(b) Install the 2 screws labeled B.






2. INSTALL NO. 1 AMPLIFIER BRACKET
(a) Install the bracket's aligning protrusions labeled A to the amplifier.
(b) Install the 2 screws labeled B.
3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH AMPLIFIER BRACKET





(a) Install the amplifier with the 3 nuts.
HINT:
Tighten the nuts in the order shown in the illustration.

4. INSTALL LUGGAGE COMPARTMENT COVER RH
5. INSTALL LUGGAGE COMPARTMENT FLOOR MAT
6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
7. PERFORM INITIALIZATION
(a) Perform initialization Repair Instruction - Initialization.
NOTICE:
Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.