Pre-Collision System

PRE-COLLISION: PRE-COLLISION SYSTEM: DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
(e) Check the details of the DTC(s) Pre-Collision System.
2. CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
(e) Clear the DTCs.