FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

How To Proceed With Troubleshooting









PARK ASSIST / MONITORING: INTUITIVE PARKING ASSIST SYSTEM: HOW TO PROCEED WITH TROUBLESHOOTING

HINT:
- Use these procedures to troubleshoot the intuitive parking assist system.
- *: Use the Techstream.

1. VEHICLE BROUGHT TO WORKSHOP
NEXT -- Continue to next step.
2. CUSTOMER PROBLEM ANALYSIS
Refer to how to proceed with troubleshooting How To Proceed With Troubleshooting.
NEXT -- Continue to next step.
3. CHECK AND CLEAR DTC*
Refer to the DTC check / clear Intuitive Parking Assist System.
NEXT -- Continue to next step.
4. CHECK INITIAL CHECK FUNCTION
Refer to operation check Operation Check.
Result:






B -- Go to step 6
A -- Continue to next step.
5. SYMPTOM SIMULATION
Refer to how to proceed with troubleshooting How To Proceed With Troubleshooting.
NEXT -- Continue to next step.
6. CHECK MULTIPLEX COMMUNICATION SYSTEM*
Refer to how to proceed with troubleshooting How to Proceed With Troubleshooting.
HINT:
This ECU is connected to the multiplex communication system. Therefore, be sure to check that there are no problems in the multiplex communication system before performing troubleshooting.

NEXT -- Continue to next step.
7. CHECK CAN COMMUNICATION SYSTEM*
Refer to the how to proceed with troubleshooting How to Proceed With Troubleshooting.
HINT:
This ECU is connected to the CAN communication system. Therefore, be sure to check that there are no problems in the CAN communication system before performing troubleshooting.

NEXT -- Continue to next step.
8. DTC CHECK*
Refer to the DTC check / clear Intuitive Parking Assist System.
Result:






B -- DTC is not output (Go to step 10)
A -- Continue to next step.
9. DTC CHART
Refer to the diagnostic trouble code chart Intuitive Parking Assist System.
NEXT -- Go to step 11
10. PROBLEM SYMPTOMS TABLE
Refer to the problem symptoms table Intuitive Parking Assist System.
NEXT -- Continue to next step.
11. CIRCUIT INSPECTION
NEXT -- Continue to next step.
12. IDENTIFICATION OF PROBLEM
NEXT -- Continue to next step.
13. REPAIR OR REPLACE
NEXT -- Continue to next step.
14. CONFIRMATION TEST
NEXT -- END