Navigation System

NAVIGATION: NAVIGATION SYSTEM: 63-46: Scratched / Reversed Disc

DTC 63-46 - Scratched / Reversed Disc

DESCRIPTION





INSPECTION PROCEDURE
HINT:
After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK THAT CD IS INSERTED PROPERLY
(a) Check that the CD is not inserted upside down.
OK:
CD is properly inserted.
NG -- INSERT CD PROPERLY
OK -- Continue to next step.
2. CHECK DISC





(a) Check that the disc is not deformed or cracked.
OK:
No deformations or cracks on the disc.
NG -- CHANGE DISC
OK -- Continue to next step.
3. DISC CLEANING





(a) Disc cleaning
(1) If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.
NOTICE:
Do not use a conventional record cleaner or anti-static preservative.

NEXT -- Continue to next step.
4. CLEAR DTC
(a) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
NEXT -- Continue to next step.
5. RECHECK DTC
(a) Recheck for DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.
OK -- END
NG -- Continue to next step.
6. REPLACE DISC WITH ANOTHER AND RECHECK
(a) Replace the disc and recheck.
(1) Replace the disc with a normal one.
(2) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(3) Recheck for DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.
NG -- REPLACE RADIO RECEIVER
OK -- END