Removal

SUPPLEMENTAL RESTRAINT SYSTEM: CURTAIN SHIELD AIRBAG ASSEMBLY: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE ROOF HEADLINING ASSEMBLY
Removal
HINT:
Refer to the procedures up to "REMOVE ROOF HEADLINING ASSEMBLY".

3. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY
(a) Disconnect the connector.
NOTICE:
When handling the airbag connector, take care not to damage the airbag wire harness.

(b) Remove the 2 clips.
(c) Remove the 9 bolts and curtain shield airbag assembly.