Removal

LIGHTING: HIGH INTENSITY DISCHARGE HEADLIGHT BULB: REMOVAL

HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE COOL AIR INTAKE DUCT SEAL Removal

3. REMOVE ENGINE ROOM SIDE COVER Removal

4. REMOVE NO. 1 HEADLIGHT BACK COVER Removal

5. REMOVE HIGH-INTENSITY DISCHARGE HEADLIGHT BULB Removal