Dynamic Radar Cruise Control System

CRUISE CONTROL: DYNAMIC RADAR CRUISE CONTROL SYSTEM:

DTC CHECK / CLEAR

1. CHECK DTC
(a) Connect Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
(e) Check the details of the DTC(s) Dynamic Radar Cruise Control System.
2. CLEAR DTC
(a) Connect Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the tester on.
(d) Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.
(e) Clear the DTCs.