DTC 61-40

NAVIGATION SYSTEM: 61-40: Mechanical Error of Media

DTC 61-40 - Mechanical Error of Media

DTC 61-41 - Eject Error

DTC 61-42 - Tape Tangling

DESCRIPTION





INSPECTION PROCEDURE
HINT: After the inspection is completed, clear the DTCs.

PROCEDURE

1. CHECK OPERATION
(a) Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.
OK:
Cassette tape is ejected.
NG -- REPLACE RADIO RECEIVER
OK -- Continue to next step.
2. CHECK CASSETTE TAPE
(a) Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.
OK:
No problem with cassette tape.
NG -- CASSETTE TAPE IS FAULTY
OK -- Continue to next step.
3. REPLACE CASSETTE TAPE
(a) Replace the cassette tape with a normal one and check if the same problem occurs again.
(1) Clear the DTCs Reading and Clearing Diagnostic Trouble Codes.
(2) Recheck for DTCs and check if the same trouble occurs again.
OK:
Malfunction disappears.
NG -- REPLACE RADIO RECEIVER
OK -- CASSETTE TAPE IS FAULTY