Front Seat Inner Belt Assembly

Front Seat Inner Belt Assembly:

FRONT SEAT INNER BELT ASSEMBLY

REMOVAL

HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT SEAT ASSEMBLY LH
3. REMOVE FRONT SEAT CUSHION SHIELD INNER LH
4. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH

a. Remove the nut and seat belt.

INSTALLATION

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH

a. Install the belt with the nut.

Torque: 42 N.m (428 kgf.cm, 31 ft.lbf)

2. INSTALL FRONT SEAT CUSHION SHIELD INNER LH
3. INSTALL FRONT SEAT ASSEMBLY LH
4. CONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION

a. Perform initialization.

NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.