Front

Height Control Sensor (for Front Side):

HEIGHT CONTROL SENSOR (for Front Side)

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE FRONT WHEEL




3. REMOVE FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
a. Disconnect the connector.
b. Remove the nut and disconnect the sensor link.
c. Remove the 2 bolts and sensor.

INSTALLATION




1. INSTALL FRONT HEIGHT CONTROL SENSOR SUB-ASSEMBLY LH
a. Install the sensor with the 2 bolts.

Torque: 7.8 N.m (80 kgf.cm, 69 in.lbf)

b. Install the nut.

Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)

c. Connect the connector.

2. INSTALL FRONT WHEEL
3. ADJUST HEADLIGHT AIMING