Step F

Step F:

Add EPT foam to outside door panel near base of A-pillar.

Foam Dimensions: 5x10x50 mm (O.20x0.40x1.97 in.)





1. Attach EPT foam to the door panel sheet metal. The location is at the front triangle area (behind where the chrome molding is normally located).

2. Align the center of the EPT foam with the location as shown in the illustration by the red arrow.

Reassembly

1. Reassemble in reverse order of disassembly (see some assembly hints on the following two pages.)

For more information refer to TIS, 2007 model year LS 460 Repair Manual, Vehicle Interior - Door/Hatch - "Front Door - Installation".

2. Reset the radio presets and clock.

3. Test drive the vehicle to confirm that the noise is improved.