VGRS System Stops or Does Not Operate

VGRS System Stops or does not Operate

INSPECTION PROCEDURE

HINT:
This problem may be caused by a malfunction in the electronically controlled brake system or power steering system.
Make sure that no DTC is output for the skid control ECU, power steering ECU, or steering control ECU before proceeding with the following procedures.
If a DTC is output for any of these ECUs, first troubleshoot it and then proceed to the troubleshooting below.

Steps 1-2(Part 1):

Steps 2(Part 2)-5(Part 1):

Step 5(Part 2):