Crankshaft, Engine

CRANKSHAFT
Crankshaft pin
Diameter
Mark 1 52.995 to 53.000 mm (2.0864 to 2.0866 in.)
Mark 2 52.989 to 52.994 mm (2.0862 to 2.0864 in.)
Mark 3 52.982 to 52.998 mm (2.0859 to 2.0865 in.)
Thrust clearance
Standard 0.020 to 0.220 mm (0.0008 to 0.0087 in.)
Maximum 0.30 mm (0.0118 in.)
Thrust washer thickness
Standard 2.44 to 2.49 mm (0.0961 to 0.0980 in.)
Circle runout
Maximum 0.06 mm (0.0024 in.)