Stop Light Does Not Illuminate

Stop Light does not Illuminate

Wiring Diagram:

Step 1-3:

Step 3 (Continued)-5:

Step 5 (Continued)-6:

Step 7-8:

Step 9-10:

Step 10 (Continued)-12:

Step 13:

INSPECTION PROCEDURE

NOTE: Check if DTC B2402 is output. If output, refer to the following procedures.

HINT: With the engine switch off, if the rear junction block ECU is in sleep mode or is malfunctioning, the fail-safe line in the rear junction block ECU operates light illuminations.