With Manufacturer's Scan Tool

DTC CLEAR (WHEN USING INTELLIGENT TESTER OR TECHSTREAM)

DTC clear

1. Connect the intelligent tester or Techstream (with CAN VIM) to the DLC3.
2. Turn the engine switch on (IG).
3. Operate the intelligent tester or Techstream to clear the codes.

HINT: Refer to the intelligent tester or Techstream operator's manual for further details.

END OF DTC CLEAR (WHEN USING SST CHECK WIRE)

a. Turn the engine switch on (IG).
b. Check that the ABS warning light, brake warning light / yellow (minor malfunction) and brake hold standby indicator light illuminate. After the engine is started, check that they turn off.