Fuel Door Release Actuator: Service and Repair
FUEL LID OPENER MOTOR ASSEMBLYFuel Lid Opener Motor Assembly (Without Rear Cooler):
Fuel Lid Opener Motor Assembly (With Rear Cooler):
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
2. REMOVE ROPE HOOK
3. REMOVE ROPE HOOK ASSEMBLY
4. REMOVE DECK TRIM SIDE BOARD LH
5. REMOVE DECK TRIM SIDE BOARD RH
6. REMOVE LUGGAGE COMPARTMENT NO. 1 LIGHT ASSEMBLY
7. REMOVE LUGGAGE COMPARTMENT NO. 2 TRIM HOOK (w/o Rear Cooler)
8. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler)
9. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
10. REMOVE REAR FLOOR FINISH PLATE
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
12. REMOVE FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY
a. Disconnect the connector.
b. Remove the 2 nuts and fuel filler opening lid lock.
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart.
1. INSTALL FUEL FILLER OPENING LID LOCK SUB-ASSEMBLY
a. Connect the connector.
b. Install the fuel filler opening lid lock and 2 nuts.
Torque: A 5.5 N.m (56 kgf.cm, 49 in.lbf)
Torque: B 8.0 N.m (82 kgf.cm, 71 in.lbf)
2. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
3. INSTALL REAR FLOOR FINISH PLATE
4. INSTALL FRONT LUGGAGE COMPARTMENT TRIM COVER
5. INSTALL LUGGAGE COMPARTMENT NO. 2 TRIM HOOK (w/o Rear Cooler)
6. INSTALL NO. 1 COOLER COVER (w/ Rear Cooler)
7. INSTALL LUGGAGE COMPARTMENT NO. 1 LIGHT ASSEMBLY
8. INSTALL DECK TRIM SIDE BOARD RH
9. INSTALL DECK TRIM SIDE BOARD LH
10. INSTALL ROPE HOOK ASSEMBLY
11. INSTALL ROPE HOOK
12. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY